0
Your shopping cart is empty!

UPS 12v

CROSSB-4_1

4-way cross-block for power supplies. The input voltage is 9-28 V. When using wires of long length and small cross section at the output of the line, we get a real voltage that may be unsuitable for powering certain devices, a situation may arise when, for example, during a short circuit (short circuit) at the end such a long power cable will not blow the output fuse of the power source. In this case, the source will work mainly to heat the wire. These reasons explain the inappropriateness of the wiring of the power of detectors and other devices of the fire alarm system using individual long wires of small cross section. Moreover, if a branched power bus departs from the IWEPR, it is very difficult to determine which branch of the bus the short circuit occurred in. To avoid such troubles, especially in objects with high saturation of the OPS equipment, the use of so-called protective switching devices (ZKU) is recommended. ZKU it is expedient to place in places of concentration of...

Sales price: 3.75 $
Discount:
Product out of stock
STAB-4507AI_1STAB-4507AI_2

Uninterruptible power supply unit, stabilized. 12V / 4A. Adjustable output voltage 12-14V. Input network 170-260V. Place under the battery 7 a / h. LED indication. Plastic case. Size: 310x185x80 mm.

Sales price: 25.17 $
Discount:
Product in stock
CROSSB-4_1

CROSSB-4

Product out of stock

4-way cross-block for power supplies. The input voltage is 9-28 V. When using wires of long length and small cross section at the output of the line, we get a real voltage that may be unsuitable for powering certain devices, a situation may arise when, for example, during a short circuit (short circuit) at the end such a long power cable will not blow the output fuse of the power source. In this case, the source will work mainly to heat the wire. These reasons explain the inappropriateness of the wiring of the power of detectors and other devices of the fire alarm system using individual long wires of small cross section. Moreover, if a branched power bus departs from the IWEPR, it is very difficult to determine which branch of the bus the short circuit occurred in. To avoid such troubles, especially in objects with high saturation of the OPS equipment, the use of so-called protective switching devices (ZKU) is recommended. ZKU it is expedient to place in places of concentration of announcers. For example, a redundant power supply can be located at the entrance to the floor, or in a specially allocated room, and at the entrances to separate groups of rooms are ZKU.
STAB-4507AI_1STAB-4507AI_2

STAB-4507AI

Product in stock

Uninterruptible power supply unit, stabilized. 12V / 4A. Adjustable output voltage 12-14V. Input network 170-260V. Place under the battery 7 a / h. LED indication. Plastic case. Size: 310x185x80 mm.
UPS_12V

STABILIZED ✅ uninterrupted power supply unit 12v (3a, 5a, 10a, 20a, 30a). Provide a STABILIZED DC output voltage. Such a power supply unit contains a network transformer, a rectifier and a stabilizer. STABILIZED - means that the output voltage does not depend (or almost does not depend) on changes in the mains voltage (within reasonable limits) and on changes in the load current. Unlike unstabilized power supplies in stabilized ones, the output voltage will be the same both at idle and at rated load. In addition, in such power supplies, the ripple of the AC voltage at the output is usually quite small.

A stabilized power supply can almost always replace an unstabilized one (but certainly not vice versa). Therefore, if you do not know which DC power supply is needed for your security system - stabilized or unstabilized, then use a STABILIZED power supply.

UNSTABILIZED uninterruptible power supplies are the most common transformer and switching power supplies. Provide DC output voltage. Such a power supply includes a mains transformer and a rectifier. In unstabilized power supplies, the output voltage corresponds to the rated voltage only at the rated mains voltage (220V) and the rated load current. With unstable mains voltage (240V-280V), such power supplies can produce 15-23V, which is very dangerous for all 12v devices. These units are only suitable for powering lighting and heating devices, electric motors and any devices with a built-in voltage regulator (for example, most cordless phones and answering machines). Such power supplies usually have a significant level of ripple in the mains voltage and are NOT SUITABLE for powering alarm systems and video surveillance systems. Stabilized power supplies should be used for these devices.